Phychemi (Hongkong) Co., Ltd Beijing Office
Telephone: 86 10-60404693
Email: info@phychemi.com
Department of After-sales, Huazhong Business Center
Telephone: 86 27-65383415
WeChat: 17301044596
Email for complaint: info@phychemi.com
Email for application: applications@phychemi.com
Department of Commerce, Huazhong Business Center
Telephone: 86 27-87981101
Business contract and installation for South:
Email: business02@phychemi.com
Business contract and installation for North:
Email: business03@phychemi.com
This standard 150 mL cell features five round glass ports. The centerport (24/25) is large enough to easily accommodate the shaft of a rotating diskor ring-disk electrode. The four side necks are smaller (14/20) and can be usedto mount reference and counter electrodes and other accessories. This cell hasan integrated water jacket that can be used to heat the contents of the maincell chamber. Two hose barbs provide access to the outer water jacket chamber.The hose barbs accept flexible tubing with a 1/4" (6.4 mm) internaldiameter (such as Tygon 2375tubing, 6.4 mm ID × 9.6 mm OD). Two accessories are included topermit deaeration of the cell contents. A dual inlet accessory which mounts inone of the side ports can be used to sparge the cell solution and/or blanketthe solution with an inert gas. A single outlet accessory serves as the escapepath for the sparging/purging gases. A complete set of PTFE stoppers forsealing the cell is also included.